dmesg - 2012-02-21 09:38
Linux version 2.6.18-92.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20071124 (Red Hat 4.1.2-42)) #1 SMP Tue Jun 10 18:51:06 EDT 2008
Command line: ro root=LABEL=/ console=ttyS0,115200n8
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 0000000000096800 (usable)
BIOS-e820: 0000000000096800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bf780000 (usable)
BIOS-e820: 00000000bf780000 - 00000000bf78e000 (ACPI data)
BIOS-e820: 00000000bf78e000 - 00000000bf7dc000 (ACPI NVS)
BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
DMI 2.6 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fb6a0
ACPI: XSDT (v001 120210 XSDT1511 0x20101202 MSFT 0x00000097) @ 0x00000000bf780100
ACPI: FADT (v003 120210 FACP1511 0x20101202 MSFT 0x00000097) @ 0x00000000bf780290
ACPI: MADT (v001 120210 APIC1511 0x20101202 MSFT 0x00000097) @ 0x00000000bf780390
ACPI: MCFG (v001 120210 OEMMCFG 0x20101202 MSFT 0x00000097) @ 0x00000000bf780470
ACPI: SPMI (v005 120210 OEMSPMI 0x20101202 MSFT 0x00000097) @ 0x00000000bf7804b0
ACPI: OEMB (v001 120210 OEMB1511 0x20101202 MSFT 0x00000097) @ 0x00000000bf78e040
ACPI: DMAR (v001 AMI OEMDMAR 0x00000001 MSFT 0x00000097) @ 0x00000000bf78e0c0
ACPI: SSDT (v001 DpgPmm CpuPm 0x00000012 INTL 0x20060113) @ 0x00000000bf78fcb0
ACPI: DSDT (v001 S0093 S0093501 0x00000501 INTL 0x20060113) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000140000000
Bootmem setup node 0 0000000000000000-0000000140000000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 1027117
DMA zone: 2677 pages, LIFO batch:0
DMA32 zone: 765880 pages, LIFO batch:31
Normal zone: 258560 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
Processor #4 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
Processor #1 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
Processor #5 6:5 APIC version 21
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)
ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)
ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 0000000000096000 - 0000000000097000
Nosave address range: 0000000000097000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Nosave address range: 00000000bf780000 - 00000000bf78e000
Nosave address range: 00000000bf78e000 - 00000000bf7dc000
Nosave address range: 00000000bf7dc000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ffe00000
Nosave address range: 00000000ffe00000 - 0000000100000000
Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
SMP: Allowing 16 CPUs, 12 hotplug CPUs
Built 1 zonelists. Total pages: 1027117
Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x16a0000 - 0x56a0000
Memory: 4032864k/5242880k available (2457k kernel code, 152312k reserved, 1246k data, 196k init)
Calibrating delay using timer specific routine.. 6669.59 BogoMIPS (lpj=3334797)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
MCE: warning: using only 9 banks
CPU0: Thermal monitoring enabled (TM1)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
result 8333968
Detected 8.333 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x4
Initializing CPU#1
Calibrating delay using timer specific routine.. 6665.98 BogoMIPS (lpj=3332993)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
MCE: warning: using only 9 banks
CPU1: Thermal monitoring enabled (TM1)
Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 6665.88 BogoMIPS (lpj=3332942)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
MCE: warning: using only 9 banks
CPU2: Thermal monitoring enabled (TM1)
Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz stepping 05
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x5
Initializing CPU#3
Calibrating delay using timer specific routine.. 6665.89 BogoMIPS (lpj=3332946)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 256K
CPU: L3 cache: 4096K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
MCE: warning: using only 9 banks
CPU3: Thermal monitoring enabled (TM1)
Intel(R) Core(TM) i5 CPU 660 @ 3.33GHz stepping 05
Brought up 4 CPUs
testing NMI watchdog ... OK.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 3333.548 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
migration_cost=1,13
checking if image is initramfs... it is
Freeing initrd memory: 2565k freed
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
PCI: Buses that can't use MMCONFIG will use type 1 PCI conf access.
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
Boot video device is 0000:06:05.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR20._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR26._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR27._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 *14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 16 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
PCI-GART: No AMD northbridge found.
pnp: 00:06: ioport range 0x290-0x29f has been reserved
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.6
IO window: c000-cfff
MEM window: fbc00000-fbcfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.7
IO window: d000-dfff
MEM window: fbd00000-fbdfffff
PREFETCH window: disabled.
PCI: Ignore bogus resource 6 [0:0] of 0000:06:05.0
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: faf00000-fb7fffff
PREFETCH window: disabled.
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.5 to 64
GSI 18 sharing vector 0xB9 and IRQ 18
ACPI: PCI Interrupt 0000:00:1c.6[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1c.6 to 64
GSI 19 sharing vector 0xC1 and IRQ 19
ACPI: PCI Interrupt 0000:00:1c.7[D] -> GSI 19 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1c.7 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1329846508.427:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 52394A11B61A91
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
PCI: Setting latency timer of device 0000:00:1c.6 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.6:pcie00]
PCI: Setting latency timer of device 0000:00:1c.7 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.7:pcie00]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [DpgPmm] OemTableId [ P001Ist] [20060707]
ACPI (exconfig-0456): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ P001Cst] [20060707]
ACPI: CPU0 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU1 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU2 (power states: C1[C1] C2[C3] C3[C3])
ACPI: CPU3 (power states: C1[C1] C2[C3] C3[C3])
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x6
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x7
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x8
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x9
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xa
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xb
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xc
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xd
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xe
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0xf
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x10
Real Time Clock Driver v1.12ac
hpet_acpi_add: no address or irqs in _CRS
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 196k freed
Write protecting the kernel read-only data: 475k
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1a.0 to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1a.0
ehci_hcd 0000:00:1a.0: irq 177, io mem 0xfbefa000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
GSI 20 sharing vector 0x3A and IRQ 20
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 58
PCI: Setting latency timer of device 0000:00:1d.0 to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
PCI: cache line size of 32 is not supported by device 0000:00:1d.0
ehci_hcd 0000:00:1d.0: irq 58, io mem 0xfbef9000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
SCSI subsystem initialized
megasr: module license 'LSI Proprietary' taints kernel.
LSI MegaSR RAID5 version v13.13.1021.2009, built on Oct 30 2009 at 13:12:18
megasr: [RAID HBA] 0x8086:0x3b25:0x1043:0x83c2: bus 0:slot 31:func 2
GSI 21 sharing vector 0x42 and IRQ 21
ACPI: PCI Interrupt 0000:00:1f.2[D] -> GSI 21 (level, low) -> IRQ 66
PCI: Setting latency timer of device 0000:00:1f.2 to 64
megasr[ahci]: HBA capabilities[0xe722ff65], S64A:[x] SNCQ:[x] SSNTF:[x] SSS:[ ] ISS:[0x2] SPM:[x] SSC:[x] PSC:[x] NCS:[0x1f] CCCS:[ ] EMS:[x] NP:[0x5]
usb 1-1: new high speed USB device using ehci_hcd and address 2
megasr[ahci]: Device:[0:ST9500420AS ] NCQ:[Yes] Queue Depth:[0x20] capacity=0x3a386030
megasr[ahci]: Device:[1:ST9500420AS ] NCQ:[Yes] Queue Depth:[0x20] capacity=0x3a386030
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
megasr: raid 1 logical drive is online, is not initialized, has 2 drives, and has a size of 0x3a175800 sectors.
megasr[raid_key]: [ ] RAID5 support [ ] SAS drive support
scsi0 : LSI MegaSR RAID5
Vendor: LSI Model: MegaSR Rev: 1.0
Type: Direct-Access ANSI SCSI revision: 04
SCSI device sda: 974608384 512-byte hdwr sectors (498999 MB)
usb 2-1: new high speed USB device using ehci_hcd and address 2
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: none
SCSI device sda: 974608384 512-byte hdwr sectors (498999 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
SCSI device sda: drive cache: none
sda: sda1 sda2 sda3 sda4
sd 0:2:0:0: Attached scsi disk sda
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.1: new high speed USB device using ehci_hcd and address 3
usb 1-1.1: configuration #1 chosen from 1 choice
hub 1-1.1:1.0: USB hub found
hub 1-1.1:1.0: 3 ports detected
usb 2-1.2: new low speed USB device using ehci_hcd and address 3
usb 2-1.2: configuration #1 chosen from 1 choice
input: HID 0566:3002 as /class/input/input0
input: USB HID v1.10 Keyboard [HID 0566:3002] on usb-0000:00:1d.0-1.2
input: HID 0566:3002 as /class/input/input1
input,hiddev96: USB HID v1.10 Device [HID 0566:3002] on usb-0000:00:1d.0-1.2
usb 1-1.1.1: new low speed USB device using ehci_hcd and address 4
usb 1-1.1.1: configuration #1 chosen from 1 choice
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input2
input: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1.1
input: American Megatrends Inc. Virtual Keyboard and Mouse as /class/input/input3
input: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.0-1.1.1
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1329846514.384:2): selinux=0 auid=4294967295 ses=4294967295
e1000e: Intel(R) PRO/1000 Network Driver - 1.1.2-NAPI
e1000e: Copyright(c) 1999 - 2009 Intel Corporation.
ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:04:00.0 to 64
0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) bc:ae:c5:35:25:2b
0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection
0000:04:00.0: eth0: MAC: 4, PHY: 8, PBA No: ffffff-0ff
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:05:00.0 to 64
input: PC Speaker as /class/input/input4
0000:05:00.0: eth1: (PCI Express:2.5GB/s:Width x1) bc:ae:c5:35:25:19
0000:05:00.0: eth1: Intel(R) PRO/1000 Network Connection
0000:05:00.0: eth1: MAC: 4, PHY: 8, PBA No: ffffff-0ff
sd 0:2:0:0: Attached scsi generic sg0 type 0
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda2, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096472k swap on /dev/sda4. Priority:-1 extents:1 across:2096472k
IA-32 Microcode Update Driver: v1.14a
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
e1000e: eth1 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
0000:04:00.0: eth1: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth1: no IPv6 routers present